A little Wheelie excitement

Yes, we work on these too. LOL

A little Wheelie excitement

Postby MrSinister on Fri Jun 19, 2009 10:29 am

This place will heat up with the monster boys building a new wheelie bow. Of course then they will give it it's own section so we will see. Any way these guys are not the only bow monster makers. I have a little build under way that will be a bow that should have been made but wasn't. I am taking the PSE Bowmadness XL and setting it up with the 2008 X Force HF cams. From what I hear this produces a bow with a 36.5 inch axel to axel. It has a 6.5 inch brace height and still carries a 350fps IBO. I can't wait for it to all come together. I will post up some photos and numbers as things go along. Any one who hasn't shot the bowmadness XL should. In the stock single cam form it is smooth as glass to draw and is a real tack driver. If I don't like the build I would still be more than happy with the bow as a single cam.
<+><
User avatar
MrSinister
Ridge Runner
 
Posts: 243
Joined: Thu Jun 30, 2005 6:01 pm
Location: Cobden, IL

Re: A little Wheelie excitement

Postby Frankenhippie on Fri Jun 19, 2009 1:58 pm

I don't know what you're talking about. :roll: :wink: :twisted:

Be sure to give us an update once you have it together. I'm interested to hear how it comes out.
Mike Schuch
Owner, Design Mgr - Monster Bows, LLC

"Accuracy kills every time. Everything else is just numbers."
User avatar
Frankenhippie
Monster Mouth
 
Posts: 3022
Joined: Mon Jun 20, 2005 7:39 am
Location: SE Michigan

Re: A little Wheelie excitement

Postby BowSniper on Sat Jun 20, 2009 12:13 pm

Frankenhippie wrote:I don't know what you're talking about. :roll: :wink: :twisted:

Be sure to give us an update once you have it together. I'm interested to hear how it comes out.


I think we all are... 8) .

BowSniper
Monster Bows Phoenix
Monsterized Oneida Stealth Eagle
User avatar
BowSniper
Ridge Runner
 
Posts: 471
Joined: Sun Jun 26, 2005 1:02 pm
Location: Lawrenceville, GA

Re: A little Wheelie excitement

Postby embalmer883 on Wed Jul 01, 2009 11:01 pm

So, is monster really coming out with a wheelie bow?
B2 Black Eagle
Parker Extreme Hunter Mag
embalmer883
Bushwhacker
 
Posts: 3
Joined: Wed Jun 25, 2008 4:30 pm

Re: A little Wheelie excitement

Postby mikieday on Thu Jul 02, 2009 7:28 am

Yes...unless mike says no...then i will say no :lol: swordhod :twisted:
Mikieday aka: Igor
Milan Mi

Sales Mgr. Monster Bows L.L.C.

STAND AND DELIVER

Image

WELCOME TO THE DARK SIDE
User avatar
mikieday
Site Admin
 
Posts: 4056
Joined: Mon Jun 20, 2005 8:49 pm
Location: SE Michigan

Re: A little Wheelie excitement

Postby Frankenhippie on Thu Jul 02, 2009 8:53 am

Nothing is off limits or out of bounds. thumup
Mike Schuch
Owner, Design Mgr - Monster Bows, LLC

"Accuracy kills every time. Everything else is just numbers."
User avatar
Frankenhippie
Monster Mouth
 
Posts: 3022
Joined: Mon Jun 20, 2005 7:39 am
Location: SE Michigan

Re: A little Wheelie excitement

Postby MrSinister on Tue Jul 14, 2009 11:40 pm

Just to update it is finished. it is exactly what it was billed to be. It is a PSE bowmadness XL with X force HF cams. The cams added at least 10fps to the bow. It is nice to see a 36.5 inch axel to axel X Force. At 27.5 inch draw length and 57lb draw weight it will send a 300 grain arrow at 296fps.
<+><
User avatar
MrSinister
Ridge Runner
 
Posts: 243
Joined: Thu Jun 30, 2005 6:01 pm
Location: Cobden, IL

Re: A little Wheelie excitement

Postby Frankenhippie on Wed Jul 15, 2009 8:10 am

Good for you. Glad it came together. Be sure to update with some pics too.
Mike Schuch
Owner, Design Mgr - Monster Bows, LLC

"Accuracy kills every time. Everything else is just numbers."
User avatar
Frankenhippie
Monster Mouth
 
Posts: 3022
Joined: Mon Jun 20, 2005 7:39 am
Location: SE Michigan

Re: A little Wheelie excitement

Postby MrSinister on Wed Jul 15, 2009 9:33 pm

Will do on the photos. It made me real aware of the problems you guys went through in the early days when you were building MR95's and the company wasn't in support of the idea. It is real hard to get around such things. If no one tinkers though nothing changes.
<+><
User avatar
MrSinister
Ridge Runner
 
Posts: 243
Joined: Thu Jun 30, 2005 6:01 pm
Location: Cobden, IL


Return to Wheelie or Cam Bows

Who is online

Users browsing this forum: No registered users and 2 guests